Thickness: thickness of the plate or the slice considered. : coefficient which connects dilations longitudinal and traverse ey = - n.ex. Young's modulus: longitudinal modulus of elasticity of material employed, it is often called ' E'. Distances between external fibres and neutral fibre: these distances are used for the calculation of stresses.Д®xt. Inertia following w: or quadratic Moment Iw = S Ds. Inertia according to v: or quadratic Moment Iv = S Ds. G modulus (trav.): traverse modulus of elasticity or Coulombs modulus. Young's modulus: longitudinal modulus of elasticity of the material employed, it is oftenД¬alled ' E'. You can also enter the desired values if necessary. section- Inertia following w- Distance from the outer fiber from the neutral axis. This window lets you choose the shape of the beam and its material.The other parameters are calculated: Its ratio between masse for a volume of material and the mass for a same volume of water.

SpecG : The specific gravity of material used. Outdistance between external fibre and neutral fibre : this distance is used for calculation the stresses. Inertia according to w : or quadratic Moment Iw = S DS. Section : The sectional area of the beam. Young's modulus : longitudinal modulus of elasticity of the material employed, it is often called ' E'. This window lets you choose the shape of the beam and its material.You can also enter the desired values if necessary. Its ratio between masse for a volume of material and the mass for a same volume of water.ДЄ double click on a line, opens an editing window for the item.

Young's modulus : longitudinal modulus of elasticity of the material employed, it is oftenД¬alled ' E'. Volume must be generated by a surface that rotates about an axis.ДЇor exemple: Tube, cylinder, punch.Note: the elements must be described by indicating the numbers of the nodes in the counterclockwise direction.Д« / Characteristic of the Bars 2D and 3D : The model Solid of Revolution is used for volumetric parts. the second :must be the top left the third : must be the bottom right the fourth :must be the top right. the first node : must be the bottom left. Note: the elements must be described by indicating the numbers of the nodes in the correct direction.

Structurix chemicals